OH .. H and shown in the product tables, ADP produces sleeves to three other designs which differ in the number and arrangement of the oil ducts and distributor grooves.

Dimensions											Mass	Designations
												Sleeve	lock nut	Locking	Appropriate
d1	d	d3	B1	B2	B3	B4	e	G	G1			complete set		washers	bearing
mm										in	kg
470	500	580	208	68	85	12	6.5	Tr500×5	M8	-	74.3	OH39/500H	HM30/500	MS30/500-96	239/500 K
470	500	580	208	68	85	12	6.5	Tr500×5	M8	-	74.3	OH39/500HB	HM30/500	MS30/500-96	239/500 K
470	500	580	208	68	85	15	10.0	Tr500×5	-	G 1/4	74.3	OH39/500	HM30/500	MS30/500-96	239/500 K
470	500	580	208	68	85	15	10.0	Tr500×5	-	G 1/4	74.3	OH39/500B	HM30/500	MS30/500-96	239/500 K
470	500	580	208	68	85	-	-	Tr500×5	-	-	74.3	OH39/500	HM30/500	MS30/500-96	239/500 K
470	500	580	247	68	85	12	6.5	Tr500×5	M8	-	82.0	OH30/500H	HM30/500	MS30/500-96	230/500 K
470	500	580	247	68	85	12	6.5	Tr500×5	M8	-	82.0	OH30/500HB	HM30/500	MS30/500-96	230/500 K
470	500	580	247	68	85	15	11.0	Tr500×5	-	G 1/4	82.0	OH30/500	HM30/500	MS30/500-96	230/500 K
470	500	580	247	68	85	15	11.0	Tr500×5	-	G 1/4	82.0	OH30/500B	HM30/500	MS30/500-96	230/500 K
470	500	580	247	68	85	-	-	Tr500×5	-	-	82.0	OH30/500	HM30/500	MS30/500-96	230/500 K
470	500	630	356	80	100	12	6.5	Tr500×5	M8	-	145.0	OH31/500H	HM31/500	MS31/500	231/500 K
470	500	630	356	80	100	12	6.5	Tr500×5	M8	-	145.0	OH31/500HB	HM31/500	MS31/500	231/500 K
470	500	630	356	80	100	15	15.0	Tr500×5	-	G 1/4	145.0	OH31/500	HM31/500	MS31/500	231/500 K
470	500	630	356	80	100	15	15.0	Tr500×5	-	G 1/4	145.0	OH31/500B	HM31/500	MS31/500	231/500 K
470	500	630	356	80	100	-	-	Tr500×5	-	-	145.0	OH31/500	HM31/500	MS31/500	231/500 K
470	500	630	428	80	100	12	6.0	Tr500×5	M8	-	170.0	OH32/500H	HM31/500	MS31/500	232/500 K
470	500	630	428	80	100	12	6.0	Tr500×5	M8	-	170.0	OH32/500HB	HM31/500	MS31/500	232/500 K
470	500	630	428	80	100	15	18.0	Tr500×5	-	G 1/4	170.0	OH32/500	HM31/500	MS31/500	232/500 K
470	500	630	428	80	100	15	18.0	Tr500×5	-	G 1/4	170.0	OH32/500B	HM31/500	MS31/500	232/500 K
470	500	630	428	80	100	-	-	Tr500×5	-	-	170.0	OH32/500	HM31/500	MS31/500	232/500 K
500	530	630	216	68	90	12	6.0	Tr530×6	M8	-	87.9	OH39/530H	HM30/530	MS30/600-530	239/530 K
500	530	630	216	68	90	12	6.0	Tr530×6	M8	-	87.9	OH39/530HB	HM30/530	MS30/600-530	239/530 K
500	530	630	216	68	90	15	11.0	Tr530×6	-	G 1/4	87.9	OH39/530	HM30/530	MS30/600-530	239/530 K
500	530	630	216	68	90	15	11.0	Tr530×6	-	G 1/4	87.9	OH39/530B	HM30/530	MS30/600-530	239/530 K
500	530	630	216	68	90	-	-	Tr530×6	-	-	87.9	OH39/530	HM30/530	MS30/600-530	239/530 K
500	530	630	265	68	90	12	6.0	Tr530×6	M8	-	105.0	OH30/530H	HM30/530	MS30/600-530	230/530 K
500	530	630	265	68	90	12	6.0	Tr530×6	M8	-	105.0	OH30/530HB	HM30/530	MS30/600-530	230/530 K
500	530	630	265	68	90	15	13.0	Tr530×6	-	G 1/4	105.0	OH30/530	HM30/530	MS30/600-530	230/530 K
500	530	630	265	68	90	15	13.0	Tr530×6	-	G 1/4	105.0	OH30/530B	HM30/530	MS30/600-530	230/530 K
500	530	630	265	68	90	-	-	Tr530×6	-	-	105.0	OH30/530	HM30/530	MS30/600-530	230/530 K
500	530	670	364	80	105	12	6.0	Tr530×6	M8	-	161.0	OH31/530H	HM31/530	MS31/530	231/530 K
500	530	670	364	80	105	12	6.0	Tr530×6	M8	-	161.0	OH31/530HB	HM31/530	MS31/530	231/530 K
500	530	670	364	80	105	15	15.0	Tr530×6	-	G 1/4	161.0	OH31/530	HM31/530	MS31/530	231/530 K
500	530	670	364	80	105	15	15.0	Tr530×6	-	G 1/4	161.0	OH31/530B	HM31/530	MS31/530	231/530 K
500	530	670	364	80	105	-	-	Tr530×6	-	-	161.0	OH31/530	HM31/530	MS31/530	231/530 K
500	530	670	447	80	105	12	6.0	Tr530×6	M8	-	192.0	OH32/530H	HM31/530	MS31/530	232/530 K
500	530	670	447	80	105	12	6.0	Tr530×6	M8	-	192.0	OH32/530HB	HM31/530	MS31/530	232/530 K
500	530	670	447	80	105	15	19.0	Tr530×6	-	G 1/4	192.0	OH32/530	HM31/530	MS31/530	232/530 K
500	530	670	447	80	105	15	19.0	Tr530×6	-	G 1/4	192.0	OH32/530B	HM31/530	MS31/530	232/530 K
500	530	670	447	80	105	-	-	Tr530×6	-	-	192.0	OH32/530	HM31/530	MS31/530	232/530 K

Adapter sleeves are using for locating bearings with a tapered bore onto a cylindrical seating as they can be used on smooth or stepped shafts. They are easy to mount and require no additional location on the shaft.

When adapter sleeves are used on smooth shafts, the bearing can be located at any position on the shaft. When used on stepped shafts, together with an abutment ring, bearings can be accurately positioned axially and bearing dismounting is also facilitated.




Basic design
ADP adapter sleeves are supplied complete with lock nut and locking device. Smaller sizes use a lock nut with a locking washer, larger sizes use a nut with locking clip. The sleeves are slotted and have an external taper of 1:12. ADP supplies–metric adapter sleeves, series designations H and OH–metric adapter sleeves for shafts with inch dimensions, series designations HA, HE and HS –adapter sleeves with inch dimensions, series designations SNW and SNPDesigns for hydraulic mountingMetric adapter sleeves To enable the hydraulic mounting to ease mounting and dismounting, metric ADP adapter sleeves having a bore diameter of 140 mm up to 500 mm can be supplied to special order already prepared for hydraulic mountings. In addition to these standard sleeves which are designated OH .. H and shown in the product tables, ADP produces sleeves to three other designs which differ in the number and arrangement of the oil ducts and distributor grooves.


Materials
The materials using in ADP adapter sleeves are carbon steel with a tensile strength at least 430N /mm2,
Dimensions
The dimensions of metric ADP adapter sleeves are in accordance with ISO 2982-1:1995; except the bore diameter of metric sleeves for inch shafts.The dimensions of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Tolerances
The bore diameter of metric ADP adapter sleeves is to tolerance JS9, the width to h15.The tolerances of ADP adapter sleeves with inch dimensions are in accordance with ANSI/ABMA Std. 8.2-1991.
Thread
Metric ADP adapter sleeves up to size 40 have metric threads with 6g tolerances, according to ISO 965-3:1998. Larger adapter sleeves have metric trapezoidal threads with 7e tolerances, according to ISO 2903:1993.ADP adapter sleeves with inch dimensions up to and including size 64 (12 inch shaft diameter) have UnifiedSpecial Form threads (based on the old American National form, class 3 design). Larger sleeves have Acme Class 3G, General Purpose threads.
Shaft tolerances
Generally, the form tolerances must be kept within narrow limits as the accuracy of form directly affects the running accuracy of the bearing. shafts should be to an h9 tolerance but the cylindricity should be to IT5/2 according to ISO 1101:2004.